- Compatible with Columns that have a 1-1/2 inch diameter
- A stylish Art Deco design turn signal switch to fit your rod, custom or stocker.
- All turn signals come with two splits to easy bolt on to your column
- Machined billet aluminum. Flashing tip means no need to drill the dash for turn signal lights - just bolt it on, wire it up and go.
- Mirror Polish Finish
***Requires the use of a 3 prong flasher can (not included)
If you're using a commercial wiring panel or kit, you can remove the 2 prong flasher & bridge the connection where it plugged in. Now use the wire marked 'turn signal feed' or similar to power up a separately mounted 3 prong flasher. This way your turn signals are still on the correct circuit & fuse (a short length of 16 gauge wire with a male spade at each end is the ideal bridge.)
The yellow wire (number 7) illuminates the tip and connects to the third prong on the flasher can. If you're installing one of these switches in a car that already has dash indicator lights, it can be wired without a 3 prong flasher, as you don't need the flashing tip.
|